ULTRASONIC SENSOR (for Rear Side) > INSTALLATION |
| 1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER |
![]() |
Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the rear bumper assembly.
| *A | LH Side |
| *B | Other Side |
| *a | Keyhole |
| *b | Snap |
| 2. INSTALL NO. 1 ULTRASONIC SENSOR |
![]() |
Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.
| *A | LH Side |
| *B | Other Side |
| 3. INSTALL ULTRASONIC SENSOR CLIP |
![]() |
Engage the 4 claws to install the ultrasonic sensor clip.
| *A | LH Side |
| *B | Other Side |
![]() |
Engage the clamp.
| *A | LH Side |
| *B | Other Side |
Connect the connector.
| 4. INSTALL REAR BUMPER ASSEMBLY |