Home › Audio/Visual/Telematics › CELLULAR COMMUNICATION › DCM(TELEMATICS TRANSCEIVER)

DCM(TELEMATICS TRANSCEIVER) > INSTALLATION

for Preparation Click here



1. INSTALL DCM (TELEMATICS TRANSCEIVER) ASSEMBLY


2. INSTALL NO. 2 DCM (TELEMATICS TRANSCEIVER) BRACKET
  1. Install the No. 2 DCM (telematics transceiver) bracket with the 2 screws.



3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
  1. Install the DCM (telematics transceiver) with bracket with the 3 screws.



4. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY
  1. Engage the 2 guides to the vehicle body to temporarily install the DCM (telematics transceiver) with back-up battery.

  1. Install the DCM (telematics transceiver) with back-up battery with the bolt.

  1. Connect each connector.

  1. Engage the 3 clamps.



5. INSTALL AUDIO AMPLIFIER COVER
  1. Install the audio amplifier cover with the 2 clips.



6. INSTALL FRONT SEAT ASSEMBLY RH
(Click here)


7. DCM ACTIVATION

HINT:
When replacing the DCM (telematics transceiver) assembly, perform vehicle contract setting (Click here).