Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
(Click here)


2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    E226470
  1. Disconnect the 2 connectors.

  1. Using a screwdriver, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

    NOTICE:
    If the claw is pulled with excessive force, it may break.



3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    E226680
  1. Disconnect the connector.

  1. Using a screwdriver, disengage the 3 claws and remove the headlight dimmer switch assembly.