Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    B278674E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Opened
    10 kΩ or higher
    1 - 2
    Locked
    Below 1 Ω

    Text in Illustration 
    *1
    Opened
    *2
    Locked
    *a
    Component without harness connected
    (Engine Hood Courtesy Switch (Hood Lock Assembly))
    If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).