Home › Engine / Hybrid System ยท 2AR-FE › ENGINE CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR (except PZEV)


    A209579
  1. Remove the 4 bolts and No. 1 exhaust manifold heat insulator.



2. REMOVE AIR FUEL RATIO SENSOR (except PZEV)


    A254802
  1. Remove the hose clamp.

  1. Disconnect the air fuel ratio sensor connector.



    A254803E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold.

    SST
    09224-00010  



3. REMOVE AIR FUEL RATIO SENSOR (for PZEV)


    A255135
  1. Disconnect the air fuel ratio sensor connector.



    A255137E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold.

    SST
    09224-00010