Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE BOX BOTTOM MAT


    B279879
  1. Remove the box bottom mat.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B279880
  1. Remove the 2 screws <C> or <D>.



    B279881
  1. Disengage the 4 clips and guide as shown in the illustration.

  1. Disconnect each connector to remove the upper console panel sub-assembly.



4. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E223737
  1. Disengage the 2 claws to remove the No. 1 stereo jack adapter assembly.