Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH

LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY


    B142645E09
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (E) - 3 (UL)
    Luggage door opening switch assembly not pushed
    10 kΩ or higher
    2 (E) - 3 (UL)
    Luggage door opening switch assembly pushed
    Below 1 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Luggage Door Opening Switch Assembly)