FRONT SEAT ASSEMBLY (for TMMK Made Manual Seat) > REASSEMBLY |
| 1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY |
Install the separate type front seat cushion spring assembly.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY |
Install the 2 front seatback hooks to the separate type front seatback spring assembly.
![]() |
Engage the 2 guides.
Engage the 4 claws to install the separate type front seatback spring assembly.
| 3. INSTALL FRONT SEATBACK FRAME SUB-ASSEMBLY |
Install the front seatback frame sub-assembly with the 4 bolts.
| 4. INSTALL FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side) |
Install the front seat cushion panel sub-assembly with the 4 bolts.
| 5. INSTALL RECLINING CONTROL LEVER |
Install the reclining control lever with the bolt.
| 6. INSTALL FRONT SEAT WIRE RH (for Front Passenger Side) |
Connect the connectors and engage the wire harness clamps to install the front seat wire RH.
| 7. INSTALL OCCUPANT DETECTION ECU (for Front Passenger Side) |
![]() |
Engage the claw to install the occupant detection ECU.
Connect the 2 connectors.
| 8. INSTALL REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side) |
Engage the 2 claws to install the rear upper seat track cover LH.
| 9. INSTALL REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side) |
Engage the 2 claws to install the rear upper seat track cover RH.
| 10. INSTALL FRONT UPPER SEAT TRACK COVER LH |
Engage the 2 claws to install the front upper seat track cover LH.
| 11. INSTALL FRONT UPPER SEAT TRACK COVER RH |
Engage the 2 claws to install the front upper seat track cover RH.
| 12. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side) |
![]() |
Engage the 2 claws to install the front seat lower cushion shield LH.
Engage the hook as shown in the illustration.
Install the screw.
| 13. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side) |
![]() |
Engage the 2 claws to install the front seat lower cushion shield RH.
Engage the hook as shown in the illustration.
Install the screw.
| 14. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side) |
Engage the 2 claws to install the front seat lower cushion shield LH.
| 15. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side) |
Engage the 2 claws to install the front seat lower cushion shield RH.
| 16. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 2 new hog rings.
Engage the 2 fasteners.
| 17. INSTALL FRONT SEAT AIRBAG ASSEMBLY |
Install the front seat airbag assembly with 2 new nuts.
Engage the 2 clamps.
| 18. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
Temporarily install the separate type front seatback cover with pad.
Engage the 4 claws to install the 2 front seat headrest supports.
Engage the 2 hooks.
Slide each hook to engage them.
Install the 4 clips.
Engage the 2 fasteners.
Engage the hook.
| 19. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 12 new hog rings.
| 20. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
Temporarily install the separate type front seat cushion cover with pad.
Engage each hook.
for Driver Side:
![]() |
Install the separate type front seat cushion cover.
for Front Passenger Side:
![]() |
Install the separate type front seat cushion cover.
Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.
| 21. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) |
for TMMK Made:
![]() |
Install the front seat inner belt assembly LH with the nut.
| *1 | Protruding Part |
Engage the clamp.
Engage each clamp under the front seat assembly.
for SIA Made:
![]() |
Install the front seat inner belt assembly LH with the nut.
| *1 | Protruding Part |
Engage the clamp.
Engage each clamp under the front seat assembly.
| 22. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) |
for TMMK Made:
![]() |
Install the front seat inner belt assembly RH with the nut.
| *1 | Protruding Part |
| *2 | Limit Switch |
Connect the limit switch with the screw.
Connect the connector.
for SIA Made:
![]() |
Install the front seat inner belt assembly RH with the nut.
| *1 | Protruding Part |
| *2 | Limit Switch |
Connect the limit switch with the screw.
Engage each clamp under the front seat assembly.
| 23. INSTALL FRONT SEAT INNER CUSHION SHIELD |
Install front seat inner cushion shield with the 2 screws.
| 24. INSTALL FRONT SEAT CUSHION SHIELD |
Engage the 2 claws to install a new front seat cushion shield.
Install the 2 screws.
| 25. CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
Connect the 2 rubber bands of the separate type front seatback cover.
| 26. INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side) |
Install the vertical adjusting handle with the screw.
| 27. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
Engage the claw to install the reclining adjuster release handle.
| 28. INSTALL SEAT ADJUSTER COVER CAP |
Install the 2 seat adjuster cover caps.