Home › Engine / Hybrid System ยท 2GR-FE › COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR ASSEMBLY
(Click here)


2. REMOVE FAN


    A255294
  1. Remove the nut and fan.



3. REMOVE NO. 2 FAN


    A255295
  1. Remove the nut and No. 2 fan.



4. REMOVE COOLING FAN MOTOR


    A255288
  1. Disconnect the clamp and connector.



    A255296
  1. Remove the 3 screws and cooling fan motor.



5. REMOVE NO. 2 COOLING FAN MOTOR


    A255289
  1. Disconnect the 4 clamps and connector.



    A255297
  1. Remove the 3 screws and No. 2 cooling fan motor.