AUDIO AND VISUAL SYSTEM (for Radio and Display Type without Intuitive Parking Assist System) > Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier |

| 1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - STEREO COMPONENT AMPLIFIER ASSEMBLY) |
Disconnect the radio and display receiver assembly connector.
Disconnect the stereo component amplifier assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester connection | Condition | Specified condition |
| I134-16 (IVO+) - I69-15 (II1+) | Always | Below 1 Ω |
| I134-17 (IVO-) - I69-14 (II1-) | Always | Below 1 Ω |
| I69-18 (SLD1) - Body ground | Always | 10 kΩ or higher |
| I134-16 (IVO+) - Body ground | Always | 10 kΩ or higher |
| I134-17 (IVO-) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||