TIRE PRESSURE WARNING RESET SWITCH > REMOVAL |
| 1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY |
| 2. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Remove the 2 screws <C> or <D>.
Open the lower instrument panel door.
![]() |
Remove the 3 screws <C> or <D>.
![]() |
Disengage the 2 clips and guide.
![]() |
Disengage the glove compartment light as shown in the illustration.
Disconnect each connector and remove the lower instrument panel sub-assembly.
| 3. REMOVE TIRE PRESSURE WARNING RESET SWITCH |
![]() |
Disengage the 2 claws to remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.