POWER STEERING SYSTEM (for 2AR-FE with Wireless Door Lock) > FREEZE FRAME DATA |
| FREEZE FRAME DATA |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Check the freeze frame data on the Techstream.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Meter Vehicle Velocity | Vehicle speed from meter/ Min.: 0.0 km/h (0.0 mph) Max.: 300.0 km/h (186.4 mph) | 0 km/h (0 mph) | Engine running and vehicle stopped |
| No significant fluctuation | Engine running and vehicle driven at a constant speed | ||
| Engine Revolution | Engine speed/ Min.: 0 rpm Max.: 12800 rpm | No significant fluctuation | Engine running at a constant speed |
| Motor Actual Current | Current to motor/ Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left | Engine running and steering wheel being turned |
| Command Value Current | Requested current to motor/ Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort - The value increases when turning right and decreases when turning left | Engine running and steering wheel being turned |
| Steering Angle Velocity | Steering angle speed/ Min.: -32768 deg/s Max.: 32767 deg/s | Value changes in proportion to steering speed - The value increases when turning left and decreases when turning right | Engine running and steering wheel being turned |
| Thermistor Temperature | ECU substrate temperature/ Min.: -50.0°C (-58.0°F) Max.: 150.0°C (302.0°F) | -50°C to 150°C (-58°F to 302°F) | - |
| PIG Power Supply | Power source voltage to active motor/ Min.: 0.0000 V Max.: 20.1531 V | 9 to 16 V | Always |
| IG Power Supply | ECU power source voltage/ Min.: 0.0000 V Max.: 20.1531 V | 9 to 16 V | Ignition switch ON |
| Steering Wheel Torque | Steering wheel torque/ Min.: -327.68 Nm Max.: 7.00 Nm | Value changes in proportion to steering effort - The value increases when turning left and decreases when turning right | Engine running and steering wheel being turned |
| Motor Rotation Angle | Motor rotation angle/ Min.: 0.000 deg Max.: 1441.770 deg | During steering operation, motor rotation angle value changes from 0 to 360° | Engine running and steering wheel being turned |
| Command Val Current 2 | Requested current to motor/ Min.: -327.68 A Max.: 327.67 A | Value changes in proportion to steering effort - The value increases when turning left and decreases when turning right | Engine running and steering wheel being turned |
| Motor Voltage | Motor power supply voltage/ Min.: 0.000 V Max.: 98.000 V | 9 to 16 V | Always |
| Motor Terminal Volt (U) | Motor terminal voltage (U phase)/ Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 16 V range | Engine running and steering wheel being turned |
| Motor Terminal Volt (V) | Motor terminal voltage (V phase)/ Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 16 V range | Engine running and steering wheel being turned |
| Motor Terminal Volt (W) | Motor terminal voltage (W phase)/ Min.: 0.000 V Max.: 98.000 V | Value changes within 4 to 16 V range | Engine running and steering wheel being turned |
| Torque Sensor 1 Output | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V | 2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| 2.5 to 3.8 V | Engine running and steering wheel being turned to the right with vehicle stopped | ||
| 1.2 to 2.5 V | Engine running and steering wheel being turned to the left with vehicle stopped | ||
| Torque Sensor 2 Output | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V | 2.3 to 2.7 V | Engine running and steering wheel not being turned (without load) |
| 1.2 to 2.5 V | Engine running and steering wheel being turned to the right with vehicle stopped | ||
| 2.5 to 3.8 V | Engine running and steering wheel being turned to the left with vehicle stopped | ||
| TRQ1 Zero Point Value | Torque sensor voltage/ Min.: 0.0000 V Max.: 4.9725 V | Values differ depending on vehicle | Engine running and steering wheel not being turned |
| TRQ2 Zero Point Value | Torque sensor voltage/ Min.: 0.0000 V Max.:4.9725 V | Values differ depending on vehicle | Engine running and steering wheel not being turned |
| PS Assist Signal | Status of the Record of Power Steering Assist Signal/ OFF or ON | OFF | Ignition switch ON |
| ON | Engine running |