Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (for 2AR-FE without Wireless Door Lock)

DTC    U0100    Lost Communication with ECM / PCM "A"

DTC    U0129    Lost Communication with Brake System Control Module

for Preparation Click here


DESCRIPTION

The power steering ECU assembly receives signals from ECM, the brake actuator assembly via the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0100
Lost communication with ECM
  1. CAN communication system
  1. ECM
U0129
Lost communication with brake actuator assembly
  1. CAN communication system
  2. Brake actuator assembly

INSPECTION PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM
  1. Go to CAN communication system (Click here).


NEXT

END