Home › Drivetrain ยท U760E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE

DIFFERENTIAL CASE > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT DIFFERENTIAL RING GEAR


    C138531E07
  1. Put matchmarks on the front differential ring gear and front differential case.
    Text in Illustration 
    *a
    Matchmark



    C138532
  1. Remove the 12 bolts.



    C138533
  1. Using a plastic hammer, tap on the front differential ring gear to remove it from the front differential case.



2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING


    C138534E09
  1. Using SST, remove the front differential case front tapered roller bearing from the front differential case.
    Text in Illustration 
    *a
    Turn
    *b
    Hold

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00480)



    C201324E01
  1. Using SST, remove the front differential case front tapered roller bearing (outer race) and shim from the transaxle housing.

    SST
    09308-00010  



3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING


    C138535E08
  1. Using SST, remove the front differential case rear tapered roller bearing from the front differential case.
    Text in Illustration 
    *a
    Turn
    *b
    Hold

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00480)



    C138536E01
  1. Using SST, remove the front differential case rear tapered roller bearing (outer race) from the transaxle case sub-assembly.

    SST
    09308-00010  



4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN


    C193758E01
  1. Using SST and a hammer, loosen the staked part of the differential case.

    SST
    09930-00010  



    C138710
  1. Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the differential case.

    NOTICE:
    Before removing the front differential pinion shaft straight pin, unstake it with a pin punch.



5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT


    C138706
  1. Remove the front No. 1 differential pinion shaft from the differential case.



6. REMOVE DIFFERENTIAL SIDE GEAR


    C138528
  1. Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears, and 2 No. 1 front differential side gear thrust washers from the differential case.



7. REMOVE FRONT TRANSAXLE CASE OIL SEAL


    C201325E01
  1. Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.

    SST
    09950-60010   (09951-00550)
    09950-70010   (09951-07200)



8. REMOVE TRANSAXLE CASE OIL SEAL


    C138709E01
  1. Using SST and a hammer, remove the transaxle case oil seal from the transaxle case sub-assembly.

    SST
    09950-60010   (09951-00650)
    09950-70010   (09951-07100)