Home › Drivetrain · U760E AUTOMATIC TRANSMISSION / TRANSAXLE › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SHIFT SOLENOID VALVE SL


    C188295E03
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Shift Solenoid Valve SL)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    Solenoid Connector - Solenoid Body
    20°C (68°F)
    11 to 15 Ω

    1. If the result is not as specified, replace the shift solenoid valve SL.

  1. Connect a battery positive (+) lead to the terminal of the solenoid valve connector, and a negative (-) lead to the solenoid body. Then check that the valve moves and makes an operating sound.

    NOTICE:
    When using battery voltage during the inspection, do not bring the positive (+) and negative (-) tester probes too close to each other as a short circuit may occur.

    OK:
    Valve moves and makes an operating sound.

    1. If the result is not as specified, replace the shift solenoid valve SL.



2. INSPECT SHIFT SOLENOID VALVE SLT


    C201747E11
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Shift Solenoid Valve SLT)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    5.0 to 5.6 Ω

    If the result is not as specified, replace the shift solenoid valve SLT.

  1. Connect a battery positive (+) lead with a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector. Then check that the valve moves and makes an operating sound.

    NOTICE:
    When using battery voltage during the inspection, do not bring the positive (+) and negative (-) tester probes too close to each other as a short circuit may occur.

    OK:
    Valve moves and makes an operating sound.

    If the result is not as specified, replace the shift solenoid valve SLT.



3. INSPECT SHIFT SOLENOID VALVE SLU

HINT:
Refer to Inspect Shift Solenoid Valve SLT.



4. INSPECT SHIFT SOLENOID VALVE SL1

HINT:
Refer to Inspect Shift Solenoid Valve SLT.



5. INSPECT SHIFT SOLENOID VALVE SL2

HINT:
Refer to Inspect Shift Solenoid Valve SLT.



6. INSPECT SHIFT SOLENOID VALVE SL3

HINT:
Refer to Inspect Shift Solenoid Valve SLT.



7. INSPECT SHIFT SOLENOID VALVE SL4

HINT:
Refer to Inspect Shift Solenoid Valve SLT.