Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY

REAR SEAT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH


    B279229
  1. Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 8 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



2. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH


    B279227
  1. Engage the 20 claws to install the rear seatback frame sub-assembly LH to the separate type rear seatback cover with pad LH.



3. INSTALL REAR SEATBACK CARPET LH


    B279226E01
  1. Engage the 2 fasteners.
    Text in Illustration 
    *1
    Fastener

  1. Install the rear seatback carpet with the 3 clips.



4. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE


    B280249
  1. Engage the guide.

  1. Install the rear seat center shoulder belt guide with the 2 screws.



5. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH


    B279225
  1. Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 10 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY RH


    B279223
  1. Engage the 20 claws to install the rear seatback frame sub-assembly RH to the separate type rear seatback cover with pad RH.



7. INSTALL REAR SEATBACK CARPET RH


    B279222E01
  1. Engage the 3 fasteners.
    Text in Illustration 
    *1
    Fastener

  1. Install the rear seatback carpet RH with the 5 clips.



8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY


    B279221
  1. Engage the guide.

  1. Install the rear seat center armrest assembly with the bolt and washer.



9. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH


    B279220
  1. Install the rear side seatback cover sub-assembly LH to the rear side seatback pad LH.



10. INSTALL REAR SEAT AIRBAG ASSEMBLY LH

CAUTION:
  1. The nuts must not be reused.
  2. Make sure that the rear side seatback frame sub-assembly is not deformed. If it is, replace it with a new one.

  1. Install the rear seat airbag assembly to the rear side seatback frame sub-assembly with 2 new nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Engage the clamp to connect the airbag wire harness.

  1. Engage the 8 hooks to install the rear side seatback cover with pad.



11. INSTALL REAR SEAT SHOULDER BELT GUIDE LH


    B280243
  1. Engage the guide.

  1. Install the rear seat shoulder belt guide LH with the 2 screws.



12. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



13. INSTALL REAR SEAT AIRBAG ASSEMBLY RH

HINT:
Use the same procedure as for the LH side .



14. INSTALL REAR SEAT SHOULDER BELT GUIDE RH

HINT:
Use the same procedure as for the LH side.



15. INSTALL BENCH TYPE REAR SEAT CUSHION COVER
  1. Engage the 4 fasteners.



  1. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 12 new hog rings.


    B279233E01


    Text in Illustration 
    *1
    Fastener
    -
    -



16. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY


  1. Engage the 13 hooks to install the rear seat cushion frame sub-assembly.


    B279231