SAFETY CONNECT SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Telematics / Data List.
According to the display on the Techstream, read the "Data List".
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Emergency Switch | Manual (SOS) switch / OFF or ON | OFF: Manual (SOS) switch not pressed | - |
| ON: Manual (SOS) switch pressed | - | ||
| Current Com Back-Up Battery | BUB (Back-Up Battery) installation history / with or without | with: BUB (Back-Up Battery) was connected at some point (does not guarantee that BUB (Back-Up Battery) is currently connected) | - |
| without: This DCM (telematics transceiver) has no record of a BUB (Back-Up Battery) ever being connected | - |