Home › Engine / Hybrid System ยท 2GR-FE › FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    A254932E02
  1. Install the fuel sender gauge assembly by sliding it downward.

  1. Connect the connector of the fuel sender gauge assembly.

  1. Install the harness protector.

    NOTICE:
    Do not damage the wire harness.



    A252641
  1. Connect the 3 harness clamps.

    NOTICE:
    Do not damage the wire harness.



2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
(Click here)