STEERING PAD SWITCH (for 3 Spoke) > REMOVAL |
| 1. REMOVE HORN BUTTON ASSEMBLY |
| 2. REMOVE STEERING PAD SWITCH ASSEMBLY |
Disconnect the steering pad switch connector from the spiral cable sub-assembly.
![]() |
Disconnect the No. 1 switch wire connector.
| *1 | Pin |
| *2 | Guide |
| *3 | Clamp |
Disengage the clamp.
Remove the 2 screws.
Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.