Home › Steering › STEERING COLUMN › STEERING PAD SWITCH (for 4 Spoke)

STEERING PAD SWITCH (for 4 Spoke) > REMOVAL

for Preparation Click here



1. REMOVE HORN BUTTON ASSEMBLY
(Click here)


2. REMOVE STEERING PAD SWITCH ASSEMBLY
  1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.



    C239354
  1. Remove the 2 screws.

  1. Disengage the claw and 2 pins to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.



    C239355
  1. Remove the 2 screws.

  1. Disengage the claw and 2 pins to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.