Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat)

LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY LH
(Click here)


2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    B280155
  1. Disconnect the 2 rubber bands of the separate type front seatback cover.



3. DISCONNECT CONNECTORS


    B280156E01
  1. Disconnect the connector (A).

  1. Disengage the clamp (B).

  1. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

  1. Disconnect the connector (E).

  1. Disengage the clamp (F).



4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B280157
  1. Disengage the hook.



    B280174
  1. Disengage the 2 fasteners.



    B280175
  1. Turn back the separate type front seatback cover.



    B280128
  1. Disengage the 2 hooks.

    1. Remove the 4 clips.

    2. Slide each hook to disengage them.



    B280129
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.



    B280177
  1. Remove the separate type front seatback cover with pad.



5. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    B280191
  1. Disconnect the connector.

  1. Disengage the 4 claws.

  1. Disengage the 2 guides to remove the lumbar support adjuster assembly.

  1. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.