LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) > INSTALLATION |
| 1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY |
Install the 2 front seatback hooks to the lumbar support adjuster assembly.
![]() |
Engage the 2 guides.
Engage the 4 claws to install the lumbar support adjuster assembly.
Connect the connector.
| 2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
Temporarily install the separate type front seatback cover with pad.
Engage the 4 claws to install the 2 front seat headrest supports.
Engage the 2 hooks.
Slide each hook to engage them.
Install the 4 clips.
Engage the 2 fasteners.
Engage the hook.
| 3. CONNECT CONNECTORS |
![]() |
Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.
Engage the clamp (B).
Connect the connector (A).
Connect the connector (E).
Engage the clamp (F).
| 4. CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
Connect the 2 rubber bands of the separate type front seatback cover.
| 5. INSTALL FRONT SEAT ASSEMBLY LH |