POWER OUTLET SOCKET > INSTALLATION |
| 1. INSTALL NO. 2 POWER OUTLET SOCKET COVER |
![]() |
Engage the 2 claws to install the No. 2 power outlet socket cover.
| 2. INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Engage the claw to install the No. 3 power outlet socket assembly.
| 3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect each connector.
Engage the 4 clips and guide.
Install the upper console panel sub-assembly with the 2 screws <C> or <D>.
| 4. INSTALL BOX BOTTOM MAT |
Install the box bottom mat.
| 5. INSTALL REAR CONSOLE BOX ASSEMBLY |