Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE BOX BOTTOM MAT


    B279879
  1. Remove the box bottom mat.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B279880
  1. Remove the 2 screws <C> or <D>.



    B279881
  1. Disengage the 4 clips and guide as shown in the illustration.

  1. Disconnect each connector to remove the upper console panel sub-assembly.



4. REMOVE NO. 3 POWER OUTLET SOCKET ASSEMBLY


    B280053E01
  1. Using a screwdriver, disengage the claw and remove the No. 3 power outlet socket assembly.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



5. REMOVE NO. 2 POWER OUTLET SOCKET COVER


    B280055
  1. Disengage the 2 claws and remove the No. 2 power outlet socket cover.