VACUUM SWITCHING VALVE (for Engine Mounting) > INSPECTION |
| 1. INSPECT DUTY VACUUM SWITCHING VALVE (OPERATION) |
![]() |
Check the operation of the duty vacuum switching valve when positive battery voltage is applied to its terminals.
| Condition | Specified Condition |
| Battery voltage is not applied | The air from pipe G is flowing out through pipes E and H. |
| Battery voltage is applied | The air from pipe F is flowing out through pipes E and H. |
| 2. INSPECT DUTY VACUUM SWITCHING VALVE (RESISTANCE) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 19 to 21 Ω |