Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER

FRONT BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)


    E228019E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



2. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)


    E228020E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



3. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    E225008
  1. Remove the screw.

  1. Disengage the 2 guides and remove the fog light assembly.



4. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the same procedure as for the LH side.



5. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Standard)


  1. w/o Side Turn Signal Light:



      B281520E01
    1. Remove the 2 screws.
      Text in Illustration 
      *1
      Hook

    2. Disengage the 2 hooks and remove the front bumper extension mounting bracket.



  1. w/ Side Turn Signal Light:



      B295694E01
    1. Remove the 2 screws.
      Text in Illustration 
      *1
      Hook

    2. Disengage the 2 hooks and remove the front bumper extension mounting bracket.



6. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Sport Package)


    B281521E01
  1. Remove the 2 screws.
    Text in Illustration 
    *1
    Hook

  1. Disengage the 2 hooks and remove the front bumper extension mounting bracket.



7. REMOVE FRONT FENDER LINER RETAINER


    B279846
  1. Disengage the claw and remove the front fender liner retainer.

    HINT:
    Use the same procedure for the RH side and LH side.



8. REMOVE FRONT BUMPER HOLE COVER LH (for Standard)


    B279847
  1. Disengage the 5 claws and remove the front bumper hole cover LH.



  1. w/ Fog Light:



      B281522
    1. Disengage the 2 claws and 2 guides, and remove the fog light mounting bracket LH.



9. REMOVE FRONT BUMPER HOLE COVER RH (for Standard)

HINT:
Use the same procedure as for the LH side.



10. REMOVE FRONT BUMPER HOLE COVER LH (for Sport Package)


    B280502
  1. Remove the 2 screws.

  1. Disengage the 7 claws and remove the front bumper hole cover LH.



    B280504
  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the front bumper side moulding LH.



    B280505
  1. Disengage the 3 claws and guide to remove the fog light mounting bracket LH.



11. REMOVE FRONT BUMPER HOLE COVER RH (for Sport Package)

HINT:
Use the same procedure as for the LH side.



12. REMOVE NO. 1 LOWER RADIATOR GRILLE


  1. for Standard:



      B279845
    1. Disengage the 16 claws and 2 guides, and remove the No. 1 lower radiator grille.



  1. for Sport Package:



      B280503
    1. Disengage the 6 claws and 2 guides, and remove the No. 1 lower radiator grille.



13. REMOVE FRONT BUMPER ENERGY ABSORBER


    B279850
  1. Disengage the 2 guides and remove the front bumper energy absorber.



14. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    B279849
  1. Disengage the 5 clamps.

  1. Remove the 6 bolts and front bumper reinforcement sub-assembly.



15. REMOVE FRONT BUMPER SIDE RETAINER LH


    B279848
  1. Remove the bolt.

  1. Disengage the claw and remove the front bumper side retainer LH.



16. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.