Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B277183
  1. Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.

  1. Disconnect each connector and remove the power window regulator master switch assembly with front door armrest base panel.



2. REMOVE OUTER MIRROR SWITCH ASSEMBLY


    B293468
  1. Disengage the 4 claws and remove the outer mirror switch assembly.