LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH > INSTALLATION |
| 1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR |
Clean the luggage compartment door outside garnish sub-assembly.
Remove any double-sided tape from the luggage compartment door outside garnish sub-assembly.
Wipe off any tape adhesive residue with cleaner.
Install a new back door outside garnish protector.
Remove the release paper from the back door outside garnish protector.
![]() |
Install a new back door outside garnish protector shown in the illustration.
| Dimension | Measurement |
| a | 5.9 mm (0.232 in.) |
| 2. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the luggage compartment door emblem. (If reusing the luggage compartment door emblem)
Using a heat light, heat the luggage compartment door emblem.
Remove the double-sided tape from the luggage compartment door emblem.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the luggage compartment door emblem.
Install the luggage compartment door emblem.
Using a heat light, heat the vehicle body and luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
![]() |
Engage the 2 pins and install the luggage compartment door emblem as shown in the illustration.
| 3. INSTALL LUGGAGE ELECTRICAL KEY SWITCH COVER (w/o Smart Key System) |
Install the luggage electrical key switch cover.
| 4. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY (w/ Smart Key System) |
Install the luggage door opening switch assembly.
| 5. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Install 6 new gaskets to the luggage compartment door outside garnish sub-assembly.
Install new clip (back door outside garnish clip) and 2 new clips to the luggage compartment door outside garnish sub-assembly.
![]() |
Engage the 3 clips to install the luggage compartment door outside garnish sub-assembly.
w/ Wireless Door Lock Control System:
Install the 6 nuts.
w/o Wireless Door Lock Control System:
Install the 4 nuts.
w/ Smart Key System:
Connect the connector.
| 6. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/o Wireless Door Lock Control System) |
![]() |
Install the luggage compartment door lock cylinder assembly with the 2 nuts.
![]() |
Connect the luggage door lock control cable sub-assembly.
| 7. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.