Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
  1. Install the blower motor with fan sub-assembly with the 3 screws.

    NOTICE:
    Do not install the blower motor with fan sub-assembly if it has been damaged or impacted.

  1. Connect the connector.



2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.