Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB
  1. Install the 2 map light bulbs to the 2 map light sockets.



    E226712
  1. Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration and install them as a unit.



2. INSTALL ROOF CONSOLE BOX ASSEMBLY (w/o Sliding Roof)
  1. Connect the connector.



    E226708
  1. Engage the 4 clips to install the roof console box assembly.



3. INSTALL ROOF CONSOLE BOX ASSEMBLY (w/ Sliding Roof)
  1. Connect the connector.



    E226710
  1. Engage the 4 clips to install the roof console box assembly.