PERSONAL LIGHT > REMOVAL |
| 1. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/o Sliding Roof) |
![]() |
Using a moulding remover, disengage the 4 clips.
Disconnect the connector and remove the roof console box assembly.
| 2. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/ Sliding Roof) |
![]() |
Using a moulding remover, disengage the 4 clips.
Disconnect the connector and remove the roof console box assembly.
| 3. REMOVE MAP LIGHT BULB |
![]() |
Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration and remove them as a unit.
Remove the 2 map light bulbs from the 2 map light sockets.