Home
›
Vehicle Exterior
›
LIGHTING (EXT)
›
FOG LIGHT ASSEMBLY
FOG LIGHT ASSEMBLY > INSTALLATION
for Preparation
Click here
HINT:
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1. INSTALL FOG LIGHT ASSEMBLY
Engage the 2 guides.
Install the fog light assembly with the screw.
Torque:
1.6 N*m{ 16 kgf*cm , 14 in.*lbf }
2. INSTALL FRONT BUMPER ASSEMBLY
(
Click here
)