Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL REAR LIGHT ASSEMBLY


    E226671E01
  1. Install the rear light assembly with the 3 nuts.

    Torque:
    Nut (A):
    4.1 N*m{ 42 kgf*cm , 36 in.*lbf }
    Nut (B):
    3.6 N*m{ 37 kgf*cm , 32 in.*lbf }

  1. Connect the connector.



2. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    B280555
  1. Install the luggage compartment door cover with the 13 clips.