Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR LIGHT GASKET


    E226672
  1. Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all the traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.



2. REMOVE BACK-UP LIGHT BULB


    E226673
  1. Turn the back-up light socket with the back-up light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the back-up light bulb from the back-up light socket.