GARAGE DOOR OPENER SWITCH > REMOVAL |
| 1. REMOVE ROOF CONSOLE BOX ASSEMBLY (GARAGE DOOR OPENER SWITCH) (w/o Sliding Roof) |
![]() |
Using a moulding remover, disengage the 4 clips.
Disconnect the connector and remove the roof console box assembly.
| 2. REMOVE ROOF CONSOLE BOX ASSEMBLY (GARAGE DOOR OPENER SWITCH) (w/ Sliding Roof) |
![]() |
Using a moulding remover, disengage the 4 clips.
Disconnect the connector and remove the roof console box assembly.