Home › Engine / Hybrid System ยท 2GR-FE › INTAKE / EXHAUST › INTAKE AIR CONTROL VALVE (for Intake Air Control System)

INTAKE AIR CONTROL VALVE (for Intake Air Control System) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT INTAKE AIR CONTROL VALVE (for Intake Air Control System)
  1. Remove the inlet No. 2 air cleaner .



    A255345
  1. Using a vacuum pump, apply 27 kPa (200 mmHg, 7.88 in.Hg) or higher of vacuum to the diaphragm chamber and check that the valve moves.

  1. Wait 1 minute and check that the needle of the vacuum pump does not lower.
    If the operation is not as specified, replace the air cleaner case sub-assembly.

  1. Install the inlet No. 2 air cleaner .