Home › Audio/Visual/Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING BUZZER

CLEARANCE WARNING BUZZER > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 CLEARANCE WARNING BUZZER
  1. Engage the clamp to install the No. 1 clearance warning buzzer.

  1. Connect the connector.



2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. Connect each connector.

  1. Engage the 4 clips and guide.

  1. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.



3. INSTALL BOX BOTTOM MAT
  1. Install the box bottom mat.



4. INSTALL REAR CONSOLE BOX ASSEMBLY
(Click here)