CLEARANCE WARNING BUZZER > REMOVAL |
| 1. REMOVE REAR CONSOLE BOX ASSEMBLY |
| 2. REMOVE BOX BOTTOM MAT |
![]() |
Remove the box bottom mat.
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Remove the 2 screws <C> or <D>.
![]() |
Disengage the 4 clips and guide as shown in the illustration.
Disconnect each connector to remove the upper console panel sub-assembly.
| 4. REMOVE NO. 1 CLEARANCE WARNING BUZZER |
![]() |
Disconnect the connector.
Disengage the clamp to remove the No. 1 clearance warning buzzer.