REMOTE ENGINE STARTER SYSTEM > OPERATION CHECK |
| REMOTE ENGINE START FUNCTION |
Point the electrical key transmitter sub-assembly at the vehicle, and press and release the lock switch twice within 2 seconds. Immediately, press and hold the lock switch for 3 seconds, then the engine starts and the hazard warning lights flash once after 3 seconds. After that, the hazard warning lights continue flashing for 10 seconds.
| REMOTE ENGINE STOP FUNCTION |
Press the unlock switch while the engine is running. After that, the engine stops and the hazard warning lights flash twice.
Press and hold the lock switch for 2 seconds or more. After that, the engine will stop and the hazard warning lights will flash once.