Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR

OUTER REAR VIEW MIRROR > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY (w/ Retract Mirror)
  1. Connect the connector.

  1. Engage the 2 claws to install the side turn signal light assembly.



2. INSTALL OUTER MIRROR COVER (w/o Retract Mirror)
  1. Engage the 8 claws to install the outer mirror cover.



3. INSTALL OUTER MIRROR COVER (w/ Retract Mirror)
  1. Engage the 7 claws to install the outer mirror cover.

  1. Connect the 2 connectors.

  1. Engage the clamp.

  1. Install the mirror actuator with the 3 screws.

    Torque:
    1.1 N*m{ 11 kgf*cm , 10 in.*lbf }



4. INSTALL OUTER REAR VIEW MIRROR (w/o Retract Mirror)
  1. w/ Mirror Heater:

    1. Connect the 2 connectors.

  1. w/ Mirror Heater and Blind Spot Monitor System:

    1. Connect the 3 connectors.

    2. Engage the 2 claws.



    B280615
  1. Engage the 2 guides on the lower part of the outer mirror to the outer rear view mirror.



    B280613
  1. Engage the 2 claws on the upper part of the outer mirror to the outer rear view mirror.



5. INSTALL OUTER REAR VIEW MIRROR (w/ Retract Mirror)
  1. Connect the 2 connectors.



    B280622
  1. Engage the 2 guides on the upper part of the outer mirror to the outer rear view mirror.



    B280620
  1. Engage the 2 claws on the lower part of the outer mirror to the outer rear view mirror.