Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the Techstream

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Customize Setting / Door Lock.

    5. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock Key Twice
      ON
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Lock
      ON*1
      OFF*2
      Function that locks all doors when the vehicle speed reaches a certain level.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Lock/Shift
      ON*2
      OFF*1
      Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Auto Unlock/Shift
      ON
      Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      All Unlock/Open-Close
      OFF
      Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off.
      OFF or ON
      Main body ECU (Multiplex network body ECU)

      1. *1: w/o Daytime Running Light Control
      2. *2: w/ Daytime Running Light Control

  1. Customizing with the Multi-display (w/ Navigation System (for Navigation Receiver Type) or Audio and Visual System (for Radio and Display Type with Intuitive Parking Assist System))

    1. Turn the ignition switch to ON.

    2. Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock on Second Key Turn
      On
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Lock by Speed
      On*1
      Off*2
      Function that locks all doors when the vehicle speed reaches a certain level.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Lock by Shift from P
      On*2
      Off*1
      Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Unlock by Shift to P
      On
      Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Unlock by Driver Door
      Off
      Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off.
      On or Off
      Main body ECU (Multiplex network body ECU)

      1. *1: w/o Daytime Running Light Control
      2. *2: w/ Daytime Running Light Control

  1. Customizing with the Multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (for Radio and Display Type without Intuitive Parking Assist System))

    1. Turn the ignition switch to ON.

    2. Enter the following menus: SET UP/ Vehicle.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Speed Sensitive Auto Lock
      Off
      Function that locks all doors when the vehicle speed reaches a certain level.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift- Linked Auto Lock
      Off
      Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift-Linked Auto Unlock
      On
      Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON.
      On or Off
      Main body ECU (Multiplex network body ECU)