DOOR CONTROL SWITCH > REMOVAL |
| 1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) |
![]() |
Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.
Disconnect each connector and remove the power window regulator master switch assembly with front door armrest base panel.
| 2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) |
![]() |
Using a moulding remover, disengage the 2 clips, 5 claws and 4 guides as shown in the illustration.
Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.
| 3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side) |
![]() |
Remove the 3 screws and power window regulator master switch assembly from the front upper armrest base panel.
| 4. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side) |
![]() |
Disengage the 2 claws and remove the door control switch assembly.