BACK DOOR COURTESY SWITCH > INSTALLATION |
| 1. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/ Wireless Door Lock Control System) |
Apply MP grease to the sliding parts of the luggage compartment door lock assembly.
Engage the luggage door lock control cable sub-assembly.
![]() |
Engage the claw as shown in the illustration.
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the connector.
| 2. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (w/o Wireless Door Lock Control System) |
Engage the luggage door lock control cable sub-assembly.
![]() |
Engage the claw as shown in the illustration.
| 3. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Wireless Door Lock Control System) |
Apply MP grease to the sliding parts of the luggage compartment door lock assembly.
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the connector.
Connect the luggage door lock control cable sub-assembly.
| 4. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.