REMOTE ENGINE STARTER SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE REMOTE ENGINE STARTER SYSTEM |
Customizing with the Techstream
Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Air Conditioner.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Air Conditioner Mode | User | This function controls the air conditioner when the remote engine start function is operating. | User/Auto | Remote Engine Starter ECU |
| Defogger Control | OFF | This function controls the window defogger operation when the remote engine start function is operating. | OFF/ON |