LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) > INSPECTION |
| 1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH |
![]() |
Check the operation of the lumbar support adjuster assembly.
Check that the front seat back moves smoothly when the battery is connected to the lumbar support adjuster assembly connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Seat back moves forward |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Seat back moves backward |
| *a | Component without harness connected (Lumbar Support Adjuster Assembly LH) |