CLOCK > REMOVAL |
| 1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.
![]() |
Using a moulding remover, disengage the 2 claws and 2 clips as shown in the illustration.
![]() |
Disengage the 3 claws and 2 clips as shown in the illustration.
![]() |
Disengage the clamp.
Disconnect the connector to remove the center instrument cluster finish panel assembly.
| 2. REMOVE CLOCK ASSEMBLY |
![]() |
Remove the 2 screws and clock assembly with instrument cluster finish panel cover from the No. 1 center instrument cluster finish panel.
![]() |
Disengage the 4 claws and remove the clock assembly.