Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)

WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the Techstream

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the Techstream on.

    4. Enter the following menus: Customize Setting / Wireless Door Lock.

    5. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Wireless Control
      ON
      Function that turns wireless door lock
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Hazard Answer Back
      ON
      When the doors are locked by wireless operation, the hazard warning lights flash once.
      When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Open Door Warning
      ON
      The buzzer sounds when lock is pressed when any of the doors are ajar.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Unlock 2 Operation
      ON
      Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Panic Function
      ON
      Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter module set sub-assembly for 0.8 seconds
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Trunk Lid Operation
      Long1
      Function to change the operation method of opening the luggage compartment door by the door control transmitter module set sub-assembly.
      1tim ON: Push the luggage open switch once
      2tim ON: Push the luggage open switch twice
      Long1: Push the luggage open switch for 0.8 seconds
      Long2: Push the luggage open switch for 1.6 seconds
      Prohibit: Wireless luggage compartment door open function is off
      1tim ON, 2tim ON, Long1, Long2 or Prohibit
      Main body ECU (Multiplex network body ECU)
      Auto Lock Time
      60 s
      Function that regulates the interval between unlocking and automatic relocking of doors
      30 s, 60 s or 120 s
      Main body ECU (Multiplex network body ECU)
      Wireless Auto Lock
      ON
      This function turns the wireless auto lock function on or off.
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Resp
      ON
      Wireless door lock buzzer response
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      P/W Wireless Ope Buzz
      ON
      Wireless power window buzzer response
      OFF or ON
      Main body ECU (Multiplex network body ECU)
      Wireless Buzzer Vol
      Level 5
      Wireless door lock buzzer volume
      Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0
      Main body ECU (Multiplex network body ECU)

  1. Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type))

    1. Turn the ignition switch to ON.

    2. Enter the following menus: SET UP / Vehicle / Vehicle Customization / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Remote 2-Press Unlock
      On
      Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Relock Timer
      60 s
      Function that regulates the interval between unlocking and automatic relocking of doors
      30 s, 60 s or 120 s
      Main body ECU (Multiplex network body ECU)
      Lock/Unlock Feedback-Lights
      On
      When the doors are locked by wireless operation, the hazard warning lights flash once.
      When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Lock/Unlock Feedback-Tone
      5
      Wireless door lock buzzer volume
      0, 1, 2, 3, 4, 5, 6 or 7
      Main body ECU (Multiplex network body ECU)

  1. Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (for Radio and Display Type and without Intuitive Parking Assist System))

    1. Turn the ignition switch to ON.

    2. Enter the following menus: SET UP / Vehicle.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Remote 2-Press Unlock
      On
      Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is off, pressing unlock switch once makes all doors unlock.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Lock Feedback Volume
      5
      Wireless door lock buzzer volume
      0, 1, 2, 3, 4, 5, 6 or 7
      Main body ECU (Multiplex network body ECU)