Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > FREEZE FRAME DATA

for Preparation Click here



CHECK FREEZE FRAME DATA
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.

  5. Select a Trouble Codes to display its Freeze Frame Data.


LIST OF FREEZE FRAME DATA
  1. Refer to "Data List / Active Test" (Click here).