Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for 2AR-FE)

FRONT DRIVE SHAFT ASSEMBLY (for 2AR-FE) > DISASSEMBLY > Preparation



SST 
I000712
09527-10011
Rear Axle Shaft Bearing Remover


I000119
09950-00020
Bearing Remover




EQUIPMENT
Torque wrench
-
Protective tape
-


LUBRICANT / Front Drive Shaft Assembly (for 2AR-FE)
Item
Capacity
Outboard joint grease
100 to 120 g (3.53 to 4.23 oz.)
Inboard joint grease
LH Side
150 to 170 g (5.29 to 5.99 oz.)
RH Side
155 to 175 g (5.47 to 6.17 oz.)

LUBRICANT / Front Drive Shaft Assembly (for 2GR-FE)
Item
Capacity
Outboard joint grease
164 to 184 g (5.78 to 6.48 oz.)
Inboard joint grease
155 to 175 g (5.47 to 6.17 oz.)


RECOMMENDED TOOLS
I102194
09012-2C540
Deep Socket Wrench
30mm

-
I000112
09904-00010
Expander Set


-
I001066
(09904-00040)
No. 3 Claw


-
I000114
09905-00012
Snap Ring No. 1 Expander


-