OUTLINE
2GR-FE Engine
The 2GR-FE engine is a 3.5-liter, 24-valve DOHC V6 engine. This engine uses the Dual VVT-i (Variable Valve Timing-intelligent) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.
| Item | Specification | |
|---|---|---|
| No. of Cyls. & Arrangement | 6-cylinder, V-type | |
| Valve Mechanism | 24-valve DOHC with Dual VVT-i | |
| Fuel System | SFI | |
| Displacement | cm3 (cu. in.) | 3456 (210.9) |
| Max. Output (EEC) | kW@rpm | 200@6200 |
| Max. Torque (EEC) | N*m@rpm | 336@4700 |
U660E Automatic Transaxle
A U660E 6-speed multi-mode automatic transaxle is used.
| Transaxle Type | U660E | |
|---|---|---|
| Combination with Engine | 2GR-FE | |
|
*: Counter gear ratio included |
||
| Gear Ratio | 1st | 3.300 |
| 2nd | 1.900 | |
| 3rd | 1.420 | |
| 4th | 1.000 | |
| 5th | 0.713 | |
| 6th | 0.608 | |
| Reverse | 4.148 | |
| Differential Gear Ratio* | 3.458 | |
Suspension
A MacPherson strut type independent suspension is used for the front.
A dual link MacPherson strut type independent suspension is used for the rear.
Steering
The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.
| *1 | Steering Gear Assembly | *2 | Steering Column Assembly |
Brake
| Item | Specification | |||
|---|---|---|---|---|
| Manufacturer | PBR | ADVICS | ||
|
*: Diameter x Thickness |
||||
| Front Brake | Type | Ventilated Disc | ||
| Rotor Size
(D x T)* |
mm (in.) | 296 x 28 (11.65 x 1.10) | ||
| Rear Brake | Type | Solid Disc | ||
| Rotor Size
(D x T)* |
mm (in.) | 286 x 10 (11.26 x 0.39) | 281 X 10 (11.06 X 0.39) | |
| Brake Control System | ABS with EBD, Brake Assist, TRC, and VSC | |||